Jacketed Gaskets
หน้าหลัก / ประเภทสินค้า / Industrial Sealing Products / ปะเก็นเหล็ก (Metallic Gasket) / Jacketed Gaskets
Jacketed Gaskets
Jacketed gaskets combine the superior temperature resistance of a metal jacket with the sealing performance of a filler material.
Single-jacketed gaskets are constructed by encasing the soft filler material on one face and both edges. The metal jacket acts as reinforcement for the soft sealing material. Style 620 is generally used where the radial dimensions of the equipment sealing surfaces only allow space for a narrow width seal.
อ่านเพิ่มเติม
Double jacketed gaskets are constructed using one piece of metal to cover the bottom and edges of the soft sealing material, and an additional piece of metal to completely cover the face. Style 623 has good compressibility and resilience and is the most popular clad gasket manufactured.
อ่านเพิ่มเติม
Construction of this gasket offers more filler protection than the standard single-jacketed design (Style 620). Style 624 is especially useful for applications where the radial dimensions do not allow space for a double-jacketed gasket.
อ่านเพิ่มเติม
Style 626 employs a corrugated jacket to increase resilience. Suited for circular and non-circular applications in widths of 3/8" (9.5 mm) and wider. The concentric corrugations act as labyrinth seals beyond the inner edge of the gasket.
อ่านเพิ่มเติม
The double shell on Style 627 allows greater hoop strength and rigidity with the addition of a completely overlapping inner seal. This gasket will withstand higher compressive loads common in high pressure applications.
อ่านเพิ่มเติม
The metal filler in Style 629 has greater resilience to problems resulting from temperature changes. This unique multiple piece construction provides a more resilient gasket that adapts well to temperature and pressure cycling. The temperature limits of this gasket are governed by the metal selected.
อ่านเพิ่มเติม
Style 631 is ideal for narrow circular applications that require a positive unbroken metal gasket line across the full width of the flange. The filler is exposed on the OD. This gasket is also available in one, two and three-piece designs.
อ่านเพิ่มเติม
Style 635 is designed to be used in lightweight flanges. The thick compressible layer of CERAFELT® is shielded on the ID with a metallic barrier. Style 635 is commonly used in applications with very hot gases and low pressures, as in duct work.
อ่านเพิ่มเติม
Metal-jacketed profile gaskets employ the same principle of reduced contact area while protecting the flange faces from damage due to scoring. This gasket is manufactured with a kammprofile core and reinforced with a single metal jacket
อ่านเพิ่มเติม
Metal-jacketed profile gaskets employ the same principle of reduced contact area while protecting the flange faces from damage due to scoring. This gasket is manufactured with a kammprofile core and reinforced with double metal jackets
อ่านเพิ่มเติม